A small yellow and black buoy on eight lines that moves with a real wave buoy at sea, live. The
Studio hides all eight motors in a 30 cm printed pedestal with four slim posts; the display and knob sit in its
top. The DIY set gives you our circuit boards and the Studio guide: you print the pedestal and buy the rest.
In the box
Driver boardCarries the 8 motor drivers, 90 × 70 mm, bare
Controller boardCarries the ESP32-S3, the 5 V converter and the plugs, 50 × 70 mm, bare
Studio assembly guideIllustrated booklet, every step from bare boards to first start
User manual32 pages, with a map of all the buoys
Owner codeStudio print files, drawings and the one-click software installer online
What you need besides
The other parts8 small stepper motors, drivers, ESP32-S3, display, USB-C power, steel rods, magnets and small parts, every part with its maker's number in the guide
A 3D printerBed at least 246 × 246 mm, for the pedestal (about 1.7 kg PETG), spools and buoy
ToolsSoldering iron (through-hole only), multimeter, hand tools, a USB-C Power Delivery charger (20 W or more, 15 V or 20 V)
Order
Coming soon VAT exempt (small business scheme) · plus shipping
